High temperature, permanent magnet biased, homopolar magnetic bearing actuator

The EEC (Electron Energy Corporation) in conjunction with the National Aeronautics and Space Administration is researching the magnetic bearings for an alternative to conventional journal or ball bearings. The purpose of this research was to design and develop a high-temperature (1000????F) hybrid Magnetic Bearing using High Temperature Permanent Magnets (HTPM), developed by the EEC for high performance jet engines at high speeds that supply loads of 500 lbf. Another objective is to design and build a test rig fixture to measure the load capacity of the designed bearing. The permanent magnet bias of the Homopolar radial magnetic bearing reduces the amount of current required for magnetic bearing operation. This reduces the power loss due to the coil current resistance and improves the system efficiency because the magnetic field of the HTPM can suspend the major portion of the static load on bearing. A high temperature radial magnetic bearing was designed via an iterative search employing 3D finite element based electromagnetic field simulations. The bearing was designed to produce 500 lbf of force at 1000????F and the design weight is 48 lbs. The bias flux of the Homopolar radial bearing is produced by EEC HTPM to reduce the related ohmic losses of an electromagnetic circuit significantly. An experimental procedure was developed to measure actual load capacity of the designed bearing at the test rig. All the results obtained from the experiment were compiled and analyzed to determine the relation between bearing force, applied current and temperature.